Plastic PE Filter For Liquid Water Filtration
- 60% high porosity
- Resistance to strong acid
- Excellent mechanical acid
Lvyuan produces wide ranges of sintered porous plastic filter products, including porous PE, HDPE, PTFE, PVDF, PA, Nylon 6, with shapes of tube, rod, candle, sheet etc. With various filtration rate, shapes and features, sintered porous plastic filter cartridges are widely used in water treatment, chemical engineering, medical treatment, automobile, environmental protection and other industries, such as oil water separator and silencer, drunk driving
tester, blind plug for medial treatment, syrup and grease filter device, anti-explosion slices for industrial battery, acid-proof slices for automobile battery, waste water treatment, water purification filter system and more.
Lvyuan sintered porous platics filters can meet requirements of different customers. Custom molded Shapes are available.
PE and HDPE Sintered filter cartridge:
Sintered Porous Polyethylene (PE) products are the most commonly used plastic filter element in the world. Porous PE plastics is strong, lightweight thermoplastic with strong chemical (acids and alkali) resistance and wide micron rates from 1 to 200um. There’re Ultra-high molecular weight Polyethylene (UHMWPE) and High-density Polyethylene (HDPE) available in tubes, sheets, rods and molded shapes available for different applications.
PTFE Sintered filter cartridge:
Micro Porous PTFE filter elements are produced by sintering pure PTFE (Polytetrafluoroethylene) granules, no other substances are used in the construction. These filter elements are usually offered when only 100% pure disposable PTFE can be used. The advantage of PTFE is a higher maximum temperature, up to 200℃, and somewhat better chemical resistance. These filter elements should be ultrasonically cleaned to give best results.
PVDF Sintered filter cartridge:
Sintered porous PVDF (Polyvinylidene fluoride) products are good choices when expose to harsh thermal, ultraviolet, ozone and chemical conditions. Porous PVDF prdoucts is extreme hard and with average pore size of 25 micron. It can work in temperature from -62 to 149℃.
PA/Nylon Sintered filter cartridge:
Nylon, trade name for polyamides (PA), is a semi-crystaline polymer that contains amine and carbonyl groups. There’re numerous versions. Nylon/PA has high strength and thermal resistance with a softening termperature of 190℃. Working temperature from -40℃ to 121℃, sintered PA/Nylon porous products have very high tensile strength, good abrasion and chemical resistance, and low coefficient of friction.
|Fiter Cartridge dimensions|
|Regular size (mm)||31x12x1000, 31x20x1000, 38x20x1000, 38x18x1000, 38x20x1200, 38x20x1300, 38x20x150, 38x20x400, 38x20x250, 38x20x200, 38x20x180, 38x20x150, 50x20x1000, 50x31x1000, 50x38x1000, 65x31x1000, 65x38x1000, 64x44x1000, 78x62x750mm, etc.|
|Other dimensions||Customized by customer’s request.|
|Material of constructions|
|Filter media option||HDPE, PTFE, PVDF, PA/Nylon etc|
|Connector type||Flat, Insert type, Thread type, Fin|
|End caps||PP, M36, M30, M25, M22, M14, M12, or as request.|
|Removal rate||0.3, 0.45, 1, 3, 5, 10,20, 30, 40, 50um|
|Maximum Operating Temperature||≦82℃|
|Maximum Operating Pressure||6.0bar|
1. High porosity (60%) to ensure a greater flow per unit area;
2. Smooth outer surface, impurities are not easy adhesion, back washing easy and thorough;
3. Anti-fouling ability: the small size of the filter so that impurities can’t be retained in the filter body;
4. Resistance to strong acid, alkali corrosion, resistance to organic solvents;
5. Excellent mechanical properties;
6. No particle release.
7. Product range and wide scope of application
1. Pharmaceutical and medical
2. Food and beverage
3. Oil and gas filtration
4. Chemical industry
5. Water Treatment
6. Machinery and Pneumatics