Plastic PE Filter for Liquid Water Filtration

Sintered Porous Plastic Filters and Industrial Components

Lvyuan manufactures sintered porous plastic filters and components in PE (including HDPE), PTFE, PVDF, and polyamide (including nylon 6). Available in tube, rod, candle, and sheet forms with a range of filtration ratings, these products are used for water purification, wastewater treatment, oil-water separation, and syrup and grease filtration. Other applications include medical devices, silencers, and industrial and automotive battery components.
Lvyuan produces wide ranges of sintered porous plastic filter products, including porous PE, HDPE, PTFE, PVDF, PA, Nylon 6, with shapes of tube, rod, candle, sheet etc. With various filtration rate, shapes and features, sintered porous plastic filter cartridges are widely used in water treatment, chemical engineering, medical treatment, automobile, environmental protection and other industries, such as oil water separator and silencer, drunk driving tester, blind plug for medial treatment, syrup and grease filter device, anti-explosion slices for industrial battery, acid-proof slices for automobile battery, waste water treatment, water purification filter system and more.
แผ่นกรอง PE

Custom Molded Shapes are Available

Lvyuan offers sintered porous plastic filter cartridges in PE/HDPE, PTFE, PVDF, and PA (nylon). PE/HDPE is lightweight and available in tubes, rods, sheets, and custom molded shapes. PTFE suits applications requiring heat and chemical resistance, PVDF is an option for exposure to UV or ozone, and PA (nylon) offers mechanical strength and wear resistance.
1

PE and HDPE Sintered Filter Cartridge

Sintered Porous Polyethylene (PE) products are the most commonly used plastic filter element in the world. Porous PE plastics is strong, lightweight thermoplastic with strong chemical (acids and alkali) resistance and wide micron rates from 1 to 200um. There’re Ultra-high molecular weight Polyethylene (UHMWPE) and High-density Polyethylene (HDPE) available in tubes, sheets, rods and molded shapes available for different applications.
2

PTFE Sintered Filter Cartridge

องค์ประกอบตัวกรอง PTFE แบบรูพรุนขนาดเล็กผลิตขึ้นโดยการเผาผนึกเม็ด PTFE (โพลีเตตระฟลูออโรเอทิลีน) ที่บริสุทธิ์ โดยไม่ใช้สารอื่นใดในการผลิต องค์ประกอบตัวกรองเหล่านี้มักถูกเสนอใช้เมื่อสามารถใช้ PTFE แบบใช้แล้วทิ้งที่บริสุทธิ์ 100% ได้เท่านั้น ข้อดีของ PTFE คือสามารถทนอุณหภูมิสูงสุดได้ถึง 200℃ และมีความต้านทานต่อสารเคมีที่ดีกว่าเล็กน้อย องค์ประกอบตัวกรองเหล่านี้ควรได้รับการทำความสะอาดด้วยคลื่นอัลตราโซนิกเพื่อให้ได้ผลลัพธ์ที่ดีที่สุด.
3

PVDF Sintered Filter Cartridge

ผลิตภัณฑ์ PVDF (โพลีไวนิลดีฟีนายด์ فلูออไรด์) ชนิดมีรูพรุนที่ผ่านการซินเทอร์เป็นตัวเลือกที่ดีเมื่อต้องสัมผัสกับสภาวะความร้อนรุนแรง รังสีอัลตราไวโอเลต โอโซน และสารเคมี ผลิตภัณฑ์ PVDF ชนิดมีรูพรุนมีความแข็งเป็นพิเศษและมีขนาดรูพรุนเฉลี่ย 25 ไมครอน สามารถทำงานได้ในอุณหภูมิตั้งแต่ -62 ถึง 149 องศาเซลเซียส.
4

PA/Nylon Sintered Filter Cartridge

Nylon, trade name for polyamides (PA), is a semi-crystaline polymer that contains amine and carbonyl groups. There’re numerous versions. Nylon/PA has high strength and thermal resistance with a softening termperature of 190℃. Working temperature from -40℃ to 121℃, sintered PA/Nylon porous products have very high tensile strength, good abrasion and chemical resistance, and low coefficient of friction.

Sintered Porous Plastic Filter Cartridge Specifications

Lvyuan sintered porous plastic filter cartridges are available in standard and custom sizes, with HDPE, PTFE, PVDF, or PA (nylon) filter media. Connector options include flat, insert, threaded, and fin styles, with a choice of end caps. Filtration ratings range from 0.3 to 50 µm. The maximum operating temperature is 82 °C, and the maximum operating pressure is 6.0 bar.
ขนาดไส้กรองDetails
ขนาดปกติ (มม.)31x12x1000, 31x20x1000, 38x20x1000, 38x18x1000, 38x20x1200, 38x20x1300, 38x20x150, 38x20x400, 38x20x250, 38x20x200, 38x20x180, 38x20x150, 50x20x1000, 50x31x1000, 50x38x1000, 65x31x1000, 65x38x1000, 64x44x1000, 78x62x750มม. เป็นต้น.
มิติอื่นผลิตตามคำขอของลูกค้า.
วัสดุก่อสร้าง
ตัวกรองสื่อHDPE, PTFE, PVDF, PA/Nylon และอื่นๆ
ประเภทขั้วต่อแบบแบน, ชนิดใส่, ชนิดเกลียว, ครีบ
ฝาปิดท้ายPP, M36, M30, M25, M22, M14, M12 หรือตามที่ร้องขอ.
ประสิทธิภาพ
อัตราการกำจัด0.3, 0.45, 1, 3, 5, 10, 20, 30, 40, 50 ไมโครเมตร
อุณหภูมิการทำงานสูงสุด≤82°C
ความดันใช้งานสูงสุด6.0 บาร์
CTA Form

Get a Quote for Sintered Porous PE Filters

Looking for a porous PE filter tube, ring, or custom molded part? Tell us what you’re filtering and where the part needs to fit. Lvyuan can recommend a material and shape for your application and quote a standard or custom configuration.