Plastic PE Filter for Liquid Water Filtration

Sintered Porous Plastic Filters and Industrial Components

Lvyuan manufactures sintered porous plastic filters and components in PE (including HDPE), PTFE, PVDF, and polyamide (including nylon 6). Available in tube, rod, candle, and sheet forms with a range of filtration ratings, these products are used for water purification, wastewater treatment, oil-water separation, and syrup and grease filtration. Other applications include medical devices, silencers, and industrial and automotive battery components.
Lvyuan produces wide ranges of sintered porous plastic filter products, including porous PE, HDPE, PTFE, PVDF, PA, Nylon 6, with shapes of tube, rod, candle, sheet etc. With various filtration rate, shapes and features, sintered porous plastic filter cartridges are widely used in water treatment, chemical engineering, medical treatment, automobile, environmental protection and other industries, such as oil water separator and silencer, drunk driving tester, blind plug for medial treatment, syrup and grease filter device, anti-explosion slices for industrial battery, acid-proof slices for automobile battery, waste water treatment, water purification filter system and more.
Pe-Filter

Custom Molded Shapes are Available

Lvyuan offers sintered porous plastic filter cartridges in PE/HDPE, PTFE, PVDF, and PA (nylon). PE/HDPE is lightweight and available in tubes, rods, sheets, and custom molded shapes. PTFE suits applications requiring heat and chemical resistance, PVDF is an option for exposure to UV or ozone, and PA (nylon) offers mechanical strength and wear resistance.
1

PE and HDPE Sintered Filter Cartridge

Sintered Porous Polyethylene (PE) products are the most commonly used plastic filter element in the world. Porous PE plastics is strong, lightweight thermoplastic with strong chemical (acids and alkali) resistance and wide micron rates from 1 to 200um. There’re Ultra-high molecular weight Polyethylene (UHMWPE) and High-density Polyethylene (HDPE) available in tubes, sheets, rods and molded shapes available for different applications.
2

PTFE Sintered Filter Cartridge

Mikroporöse PTFE-Filterelemente werden durch Sintern von reinem PTFE (Polytetrafluorethylen)-Granulat hergestellt, es werden keine anderen Stoffe in der Konstruktion verwendet. Diese Filterelemente werden in der Regel angeboten, wenn nur 100% reines Einweg-PTFE verwendet werden kann. Der Vorteil von PTFE ist eine höhere Höchsttemperatur, bis zu 200℃, und eine etwas bessere chemische Beständigkeit. Diese Filterelemente sollten mit Ultraschall gereinigt werden, um beste Ergebnisse zu erzielen.
3

PVDF Sintered Filter Cartridge

Gesinterte poröse PVDF-Produkte (Polyvinylidenfluorid) sind eine gute Wahl, wenn sie rauen thermischen, ultravioletten, ozonhaltigen und chemischen Bedingungen ausgesetzt sind. Poröse PVDF-Produkte sind extrem hart und haben eine durchschnittliche Porengröße von 25 Mikron. Es kann bei Temperaturen von -62 bis 149℃ arbeiten.
4

PA/Nylon Sintered Filter Cartridge

Nylon, trade name for polyamides (PA), is a semi-crystaline polymer that contains amine and carbonyl groups. There’re numerous versions. Nylon/PA has high strength and thermal resistance with a softening termperature of 190℃. Working temperature from -40℃ to 121℃, sintered PA/Nylon porous products have very high tensile strength, good abrasion and chemical resistance, and low coefficient of friction.

Sintered Porous Plastic Filter Cartridge Specifications

Lvyuan sintered porous plastic filter cartridges are available in standard and custom sizes, with HDPE, PTFE, PVDF, or PA (nylon) filter media. Connector options include flat, insert, threaded, and fin styles, with a choice of end caps. Filtration ratings range from 0.3 to 50 µm. The maximum operating temperature is 82 °C, and the maximum operating pressure is 6.0 bar.
Abmessungen der Fiter-PatroneDetails
Normale Größe (mm)31x12x1000, 31x20x1000, 38x20x1000, 38x18x1000, 38x20x1200, 38x20x1300, 38x20x150, 38x20x400, 38x20x250, 38x20x200, 38x20x180, 38x20x150, 50x20x1000, 50x31x1000, 50x38x1000, 65x31x1000, 65x38x1000, 64x44x1000, 78x62x750mm, etc.
Andere AbmessungenIndividuell nach Kundenwunsch.
Material der Konstruktionen
Option FiltermedienHDPE, PTFE, PVDF, PA/Nylon usw.
SteckertypFlach, Einsatztyp, Gewindetyp, Lamelle
EndkappenPP, M36, M30, M25, M22, M14, M12, oder auf Anfrage.
Leistung
Entfernungsrate0,3, 0,45, 1, 3, 5, 10, 20, 30, 40, 50 um
Maximale Betriebstemperatur≦82℃
Maximaler Betriebsdruck6,0bar
CTA Form

Get a Quote for Sintered Porous PE Filters

Looking for a porous PE filter tube, ring, or custom molded part? Tell us what you’re filtering and where the part needs to fit. Lvyuan can recommend a material and shape for your application and quote a standard or custom configuration.