Multi Cartridge Filter Housing Stainless Steel 304/316

It Can Be Customized According To Customer Needs

Multi cartridge filter housing structure  

1. Shell: Stainless steel (304/316L), mirror polished surface or electrolytic treatment to reduce the adhesion of pollutants.
2. Filter cartridge: multi-core parallel design, cartridge types include folded, wound, wedge wire, etc., can be disassembled and replaced.
3. sealing system: food-grade silicone sealing ring to ensure no leakage.
4. Control system (self-cleaning model): differential pressure sensor, motorized drain valve, backwash rotary arm.
5. Exhaust valve and drain port: optimize filtration effect and cleaning efficiency.

Multi cartridge filter housing production process  

1. Material selection: stainless steel plate cutting and forming, cartridge material (such as polypropylene fiber, stainless steel wire) pre-treatment.
2. Core tube manufacturing: stainless steel or carbon steel pipe welding, surface roughness control.
3. Filter assembly: Filter cartridge according to the precision requirements of winding / folding, high temperature sintering fixed.
4. Welding and polishing: shell and head welding, mirror polishing or electrolytic treatment.
5. Testing and inspection: pressure test (0.6-2.5MPa), air tightness test, filtration efficiency verification.

Multi cartridge filter housing Advantages

1. High-efficiency filtration: multi-core parallel design, large filtration area, small flow loss.
2. Durable material: 316L stainless steel is corrosion resistant, and the life span of the filter element is more than 10 years.
3. Intelligent control (self-cleaning type): differential pressure automatic backwashing, support for remote monitoring.
4. Convenient maintenance: quick-open structure, cartridge replacement without tools.
5. Flexible customization: size, interface, and number of cartridges can be adjusted as required.

How is the Maintenance?

1. Daily inspection: monitor the pressure difference between inlet and outlet (normal range 0.1-0.5MPa), beyond 0.2MPa need to clean or replace the cartridge.
2. Cleaning process:

– Backwashing: backwash with sterile water, close the original liquid pipeline and then drain.

– Chemical cleaning: use citric acid or special cleaning agent to soak the cartridge. 3.

3. Cartridge Replacement: Insert the cartridge vertically, moisten the sealing ring to reduce the resistance, and avoid installing the cartridge backwards.
4. Seal maintenance: Check the seal wear regularly and replace it in time.

Application Scenarios  

• Chemical/Petroleum: Catalyst recovery, crude oil filtration, circulating water treatment
• Pharmaceutical/Biological: Pharmaceutical liquid sterilization, purified water preparation
• Food & Beverage: Fruit juice clarification, beer filtration, edible oil refining
• Food & Beverage: Fruit Juice Clarification, Beer Filtration, Edible Oil Refining
• Water Treatment: Desalination Pretreatment, Wastewater Suspended Matter Removal
• Electronics/Semiconductor: Ultrapure water preparation, chemical reagent filtration

Customized service:  

– Non-standard size (diameter 100-1200mm), special interface (DN15-DN700), high temperature/high pressure resistant design.

– Filter element material can be selected from ceramic membrane, nano-fiber, etc. to meet the demand for sterile grade.

FAQ  

1. Q: How often should the filter element be replaced?  

A: Every 6-12 months under normal working conditions, depending on the differential pressure (>0.2MPa need to be replaced).

2. Q: Can it filter viscous liquid?  

A: Yes, it is necessary to choose wedge wire cartridge or increase the filtration area to prevent clogging.

3. Q: How to choose the filtration precision?  

A: According to the requirements of downstream equipment, for example, 1μm precision is needed to protect reverse osmosis membrane, 0.22μm is needed for pharmaceutical sterile filtration.

4. Q: How long is the customization cycle?  

A: 3-7 days for standard models, 15-30 days for non-standard designs (depending on complexity).